Can I Connect An Ip Camera Directly To My Computer?

In this article, there are 5 ways yous can connect your Security IP Camera to your computer. And we volition cover the steps on how you should practise it without a router, without cyberspace, without a DVR/NVR or without its receiver. The following table summarizes the important information about connecting IP camera to your calculator for your reference.

Photographic camera types:	POE camera or WiFi camera
Os(operation organisation):	Windows or Mac
Cablevision:	2-in-ane or 3-in-1 cablevision attached from the camera
Remotely access by:	Photographic camera's UID

Annotation: First you should install the security camera in the right place. You can refer to How to Install Domicile Security Cameras Successfully.

five Methods to Connect Your Security IP Camera to PC/Mac：

To make it easier for you to find the right solution, you lot can click and bound straight to the section yous want.

For case, if your camera is a PoE photographic camera, then you can cull option three or four.

1. Connect Straight to PC/Mac (without Internet)
two. Connect via Router (with Internet)
3. PoE (Wired) Photographic camera without Injector/Switch
four. PoE (Wired) Camera with Injector/Switch
five. Connect a CCTV Camera Organization to PC/Mac

Important Note: The methods recommended beneath may Not apply for the bombardment-powered security cameras, which require initial setup on your phones.

Connect a WiFi or PoE Photographic camera Direct to PC/Mac (without Net)

Here's how to connect your security IP camera directly to a PC/Mac without an NVR or DVR, without a router network, without WiFi, and without whatever costs or complicated configurations.

you need to set the camera's power adapter and a network cable.

one. Get your security camera charged.

Utilize the power adapter to go the camera plugged-in and charged. Ordinarily, when you buy a WiFi IP camera, information technology comes with a power adapter. For a PoE camera, ask the supplier and purchase one that's workable for the photographic camera.

two. Use the network cable to connect to the camera and the computer.

Normally there would be a 2-in-1 or 3-in-1 cable attached from the camera. Find the network connector from that cable and use the network cablevision to connect to it. Then connect the other end of the network cable to the figurer. If your computer has a network already, disable it – make certain your estimator is offline. Connect IP Camera Directly to PC

three. Browse and find out the security photographic camera's IP accost on the computer.

Now the security camera is connecting to your computer basically and physically. But you nevertheless can't view the camera on the estimator. What you demand to practise now is to scan and find out the photographic camera's IP address. There should exist surveillance software from the same supplier with the photographic camera. Take our exam as an example. We have Reolink Client on the computer. Launch it and it will automatically scan all the cameras in the aforementioned local LAN and show the default IP accost (every camera has a default and unique IP accost when information technology leaves the mill). Like shooting fish in a barrel peasy! Camera IP Address

4. Alter the computer's IP address to the same network prefix of the IP camera.

So in Step three, you get your security camera's default IP address. In our test, the default IP accost of the camera we utilize is 192.168.177.100, and at present you need to modify your computer'south IP accost to 192.168.177.ten, where ten identifies the node/host and is the number between two and 254. Then permit's say the figurer'due south IP accost is 192.168.177.12.

IP address 101: An IP address consists of two parts – one belongs to the network accost and one belongs to the node accost. All nodes on a given network share the same network prefix just have a unique host number.

Now to modify the computer's IP address (we take Windows x as an example):

ane) Press the Windows + R keyboard shortcut to bring out the Run box.

2) Enter "ncpa.cpl" and open up the "Network Connections" window.

Computer Run Box

iii) Right-click your computer' network adapter and select "Properties".

Network Adapter Properties

4) Select your computer'due south Internet Protocol Version and click "Backdrop".

Internet Protocol Properties

5) Select "Use the post-obit IP address" and alter the IP address into 192.168.177.12.

Change Computer IP Address

And washed. Now your IP camera is connecting directly and communicating with your PC, considering they are at present in the aforementioned piddling LAN. Y'all tin can watch your IP camera with Reolink Customer on your computer.

Of import: Since there is no router network, the IP camera would not transmit data or send alarms to your phone. Still, you can record and save all the footage onto your calculator.

If you're gonna apply your IP camera with the reckoner all the time like this (without router network), you'd better change the default status of your IP camera's IP accost to the static to keep it the same all the time, considering each time you reboot the IP camera, its IP address volition be inverse and y'all will need to exercise all the steps higher up once again. To keep the IP camera'due south IP address the same all the time, caput to "Device Settings" and "Network Full general" on the Client (Reolink Client in our test), and choose "Static" for "Network Access". And done. Static IP Address for Camera

Connect a Wireless/WiFi Camera to Computer via Router (with Internet)

If you practise have WiFi network and demand to remotely see the IP camera when you're non there, you tin can connect your wireless or WiFi photographic camera to figurer wirelessly via your router. Please note that you need to have, at least, a power adapter for the photographic camera, a network cablevision, and a router.

1. Become your WiFi security camera charged.

Use the power adapter to get the photographic camera plugged-in and charged.

ii. Use the network cable to connect to the photographic camera and the router.

A WiF camera needs to connect to the router with a network cable for initial setup, because the new camera itself wouldn't recognize and auto-option upward a network that it never uses. Only later the right WiFi settings tin you disconnect the cable from the camera and the router. And yep again, normally there would exist a 2-in-one or 3-in-1 cable attached from the WiFi camera. Notice the network connector from that cable and use the network cable to connect to it. And so connect the other stop of the network cable to the router. Connect WiFi Camera to PC

3. Watch the IP camera on PC/Mac

On the figurer, launch the surveillance software to add the camera and watch live view direct. In our test, we open Reolink Client. Since the computer and the camera are in the same network (using the aforementioned router network), Reolink Customer automatically searches and displays the photographic camera directly. Click "Start" and you tin can view the camera on PC. And you can prepare upwardly the configurations for all the functions you want the camera to have.

iv. Set upward WiFi settings and remove the network cable.

Do recollect to brand the WiFi settings for the camera. On the software, navigate to "Device Settings" and "Network". Choose the WiFi network and enter the password, and washed. Cameras from the different brands would have different WiFi settings. Please refer to the guides you become from your supplier. Subsequently that, remove the network cable, and then the security IP CCTV camera connects to the computer wirelessly.

Important: If y'all need to see the IP photographic camera from another reckoner that is not in the aforementioned network, yous need to input the camera's UID into the software to remotely admission the camera.

Connect a PoE (Wired) IP Camera to Computer without PoE Injector/Switch

Connecting a PoE wired IP photographic camera to a reckoner via the router is like to that of a WiFi photographic camera, and even much easier – yous don't need to use a ability adapter, prepare up the WiFi and remove the network cable. And you need at least one network cable, and a router with PoE adequacy to consummate the setup.

1. Use the network cable to connect to the camera and the router.

PoE (Power over Ethernet) means you can just use a single network cable for both video and power manual. So simply connect the photographic camera to the router via the network cable, and the camera will get power supply and network admission. Cloud Storage Please make certain your router has the PoE feature. If not, try the next method.

2. Watch the IP camera on the calculator.

On the estimator, launch the surveillance software to add the camera and watch alive view directly. In our exam, we open up Reolink Client. Since the reckoner and the camera are in the same network, Reolink Client automatically searches and displays the photographic camera directly. Click "Start" and you can view the camera on PC. And you tin can set up the configurations for all the functions you want the camera to take.

Of import: If you need to see the IP camera from another computer that is not in the aforementioned network, you need to input the camera'southward UID into the software to remotely admission the camera.

Connect a PoE (Wired) IP Camera to Computer with PoE Injector/Switch

If your router does non support PoE, you demand a PoE injector or PoE switch to aid connect your IP photographic camera to PC.In club to consummate the setup you need at least a network cable, a router, and a PoE injector or PoE switch. Since the steps on how to connect a PoE IP camera to PC via PoE Injector/switch are quite the same to that of connecting without a PoE Injector/switch, we'd similar to make it more simpler to sympathise here.

ane.connect the security camera, router and PoE injector

Connect all the devices every bit the motion picture showed below, make certain your wireless IP camera is connected to a power supply. PoE Camera Connecting to PC

ii. Open Reolink Client & add together the camera directly

You lot tin can now open up Reolink Customer on your estimator, add the camera and watch alive view straight. If you demand to see the IP camera from another reckoner that is non in the aforementioned network, you lot demand to input the photographic camera's UID into the software to remotely access the camera.

Important: Once you connect the PoE IP camera to the PoE injector or switch which is continued to a router via Ethernet cables, you've successfully continued the photographic camera to the network. For a wireless IP camera, you lot need to use a network cable to connect it to the router if you oasis't fix the WiFi network configuration. And and so the wireless IP camera is in the network. You tin can prepare up the WiFi configuration later to make the wireless IP photographic camera connect wirelessly.

Connect a CCTV Camera System to PC/Mac (with or without Network)

If you are using a CCTV camera organization, like the Reolink PoE kit RLK8-410B4, instead of single security camera, yous may need the following tutorial. A CCTV photographic camera system often have their own proprietary networks, and tin piece of work with and without your router network.

1. How to connect a CCTV security photographic camera organization to a calculator without router network

Connect all the cameras to the NVR:When yous receive the new IP camera system you lot bought, connect all the devices you got – connect the NVR to your computer's monitor and the mouse, utilise the ability adapters to charge the NVR and cameras, etc. For a WiFi system, in one case the WiFi NVR and the WiFi cameras are charged, they continued to each other automatically and would start to communicate. For a PoE arrangement, connect the PoE cameras to the NVR via the network cables provided.
Commencement watching the IP cameras:The startup and setup wizard will pop up to guide you lot to watch your cameras and do other configurations.

At present you can run across all the IP cameras on your monitor and starting time recording.

two. How to connect a CCTV security camera system to a reckoner with router network

Practise the step i shown above again.
Connect the NVR to your router via the network cable provided.
First watching the IP cameras.

The startup and setup magician will pop upward to guide you to watch your cameras and practice other configurations. If yous need to encounter the IP cameras from some other computer that is not in the same network, you demand to input the NVR's UID into the software to remotely access the cameras.

Inforgraphic:

The infographic below likewise covers our 5 methods to connect IP security camera to PC/Mac . Hope this can be helpful to you.

How to Connect Security Camera to PC

Third-Political party Software to Connect IP Camera to PC/Mac

Y'all tin can likewise opt for third-party software to connect and prepare a security camera on the estimator. Brand sure the software can handle all the cameras on the network and back up all the features for the cameras. Normally, the tertiary-political party software has several versions. And if you want to use full features of the camera, you need to pay for a premium version. If your security IP camera is not working properly as expected or if you get any issues, you can try the top 10 solutions to fix IP cameras not working.

For any questions, please don't hesitate to leave it in your comment. I volition reply as before long as possible.

Source: https://m.reolink.com/connect-security-ip-camera-to-pc/

Posted by: arrudalivine.blogspot.com